Switching A Dual Band PIFA To Operate In Four Bands

Junfeng Wu; Chinthana J. Panagamuwa; Patrick McEvoy; John C. Vardaxoglou; Omar A. Saraereh

doi:10.1109/APS.2006.1711153

Switching A Dual Band PIFA To Operate In Four Bands

Junfeng Wu, Chinthana J. Panagamuwa, Patrick McEvoy, John C. Vardaxoglou, Omar A. Saraereh

Research output: Contribution to journal › Conference article › peer-review

Abstract

The antenna presented in this paper is based on a small dual band PIFA with maximum dimensions 36 mm times 12 mm times 6 mm. This size is typical of a PIFA designed for a contemporary mobile phone. While versatile, at lower frequencies it is often difficult to completely cover the GSM850 and EGSM 900 bands simultaneously using a small antenna. In this paper, a PIFA is reported with switches to select between two sets of low and high resonance pairs. The antenna has been designed with the intention to operate in either of the GSM850/GSM1900 and GSM900/GSM1800 band pairs, while being manufactured with standard planar photolithography processes

Original language	English
Pages (from-to)	2675-2678
Number of pages	4
Journal	IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
DOIs	https://doi.org/10.1109/APS.2006.1711153
Publication status	Published - 2006
Externally published	Yes
Event	IEEE Antennas and Propagation Society International Symposium, APS 2006 - Albuquerque, NM, United States Duration: 9 Jul 2006 → 14 Jul 2006

Access to Document

10.1109/APS.2006.1711153

Cite this

@article{e22ee070a2794b6c884799d62f2594ad,

title = "Switching A Dual Band PIFA To Operate In Four Bands",

abstract = "The antenna presented in this paper is based on a small dual band PIFA with maximum dimensions 36 mm times 12 mm times 6 mm. This size is typical of a PIFA designed for a contemporary mobile phone. While versatile, at lower frequencies it is often difficult to completely cover the GSM850 and EGSM 900 bands simultaneously using a small antenna. In this paper, a PIFA is reported with switches to select between two sets of low and high resonance pairs. The antenna has been designed with the intention to operate in either of the GSM850/GSM1900 and GSM900/GSM1800 band pairs, while being manufactured with standard planar photolithography processes",

author = "Junfeng Wu and Panagamuwa, \{Chinthana J.\} and Patrick McEvoy and Vardaxoglou, \{John C.\} and Saraereh, \{Omar A.\}",

year = "2006",

doi = "10.1109/APS.2006.1711153",

language = "English",

pages = "2675--2678",

journal = "IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)",

issn = "1522-3965",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

note = "IEEE Antennas and Propagation Society International Symposium, APS 2006 ; Conference date: 09-07-2006 Through 14-07-2006",

}

TY - JOUR

T1 - Switching A Dual Band PIFA To Operate In Four Bands

AU - Wu, Junfeng

AU - Panagamuwa, Chinthana J.

AU - McEvoy, Patrick

AU - Vardaxoglou, John C.

AU - Saraereh, Omar A.

PY - 2006

Y1 - 2006

N2 - The antenna presented in this paper is based on a small dual band PIFA with maximum dimensions 36 mm times 12 mm times 6 mm. This size is typical of a PIFA designed for a contemporary mobile phone. While versatile, at lower frequencies it is often difficult to completely cover the GSM850 and EGSM 900 bands simultaneously using a small antenna. In this paper, a PIFA is reported with switches to select between two sets of low and high resonance pairs. The antenna has been designed with the intention to operate in either of the GSM850/GSM1900 and GSM900/GSM1800 band pairs, while being manufactured with standard planar photolithography processes

AB - The antenna presented in this paper is based on a small dual band PIFA with maximum dimensions 36 mm times 12 mm times 6 mm. This size is typical of a PIFA designed for a contemporary mobile phone. While versatile, at lower frequencies it is often difficult to completely cover the GSM850 and EGSM 900 bands simultaneously using a small antenna. In this paper, a PIFA is reported with switches to select between two sets of low and high resonance pairs. The antenna has been designed with the intention to operate in either of the GSM850/GSM1900 and GSM900/GSM1800 band pairs, while being manufactured with standard planar photolithography processes

UR - https://www.scopus.com/pages/publications/59049102928

U2 - 10.1109/APS.2006.1711153

DO - 10.1109/APS.2006.1711153

M3 - Conference article

AN - SCOPUS:59049102928

SN - 1522-3965

SP - 2675

EP - 2678

JO - IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)

JF - IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)

T2 - IEEE Antennas and Propagation Society International Symposium, APS 2006

Y2 - 9 July 2006 through 14 July 2006

ER -

Switching A Dual Band PIFA To Operate In Four Bands

Abstract

Access to Document

Fingerprint

Cite this