Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment

Shafiuzzaman K. Khadem; Malabika Basu; Ruth Kerrigan; Biswajit Basu

doi:10.1109/ISIE.2014.6865043

Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment

Shafiuzzaman K. Khadem
, Malabika Basu
, Ruth Kerrigan
, Biswajit Basu

School of Electrical and Electronic Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In this paper, the placement of Custom Power Devices (CPDs) to improve the power quality of a distributed generation (DG) integrated building energy system (BES) has been analyzed. A typical residential building energy has been modeled in a Virtual Environment (VE) simulator. The extracted energy demand is generated by input load demand and hourly operating information. Based on the electrical energy demand for a typical day, a DG integrated BES (DG-BES) is then simulated in MATLAB to extract the current/voltage disturbance information into the network. Outcome of this simulation shows the voltage/current waveform along with the disturbances at different locations in the building. Finally a CPD is placed into the network and simulation in MATLAB shows the performance of the device by improving the power quality of the DG-BES. The city of Dublin, Ireland has been chosen as a geographical location and VE-Pro software has been used to develop the virtual environment simulation for the building energy system.

Original language	English
Title of host publication	Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	2676-2681
Number of pages	6
ISBN (Print)	9781479923991
DOIs	https://doi.org/10.1109/ISIE.2014.6865043
Publication status	Published - 2014
Event	2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014 - Istanbul, Turkey Duration: 1 Jun 2014 → 4 Jun 2014

Publication series

Name	IEEE International Symposium on Industrial Electronics

Conference

Conference	2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014
Country/Territory	Turkey
City	Istanbul
Period	1/06/14 → 4/06/14

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Building Energy Management System
Custom Power Devices
Distributed Generation
Micro-generation
Power Quality
Smart Grid
Virtual Environment

Access to Document

10.1109/ISIE.2014.6865043

Cite this

Khadem, S. K., Basu, M., Kerrigan, R., & Basu, B. (2014). Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment. In Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014 (pp. 2676-2681). Article 6865043 (IEEE International Symposium on Industrial Electronics). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISIE.2014.6865043

Khadem, Shafiuzzaman K. ; Basu, Malabika ; Kerrigan, Ruth et al. / Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment. Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 2676-2681 (IEEE International Symposium on Industrial Electronics).

@inproceedings{129c5b335e144f66b47ace0058d4b19a,

title = "Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment",

abstract = "In this paper, the placement of Custom Power Devices (CPDs) to improve the power quality of a distributed generation (DG) integrated building energy system (BES) has been analyzed. A typical residential building energy has been modeled in a Virtual Environment (VE) simulator. The extracted energy demand is generated by input load demand and hourly operating information. Based on the electrical energy demand for a typical day, a DG integrated BES (DG-BES) is then simulated in MATLAB to extract the current/voltage disturbance information into the network. Outcome of this simulation shows the voltage/current waveform along with the disturbances at different locations in the building. Finally a CPD is placed into the network and simulation in MATLAB shows the performance of the device by improving the power quality of the DG-BES. The city of Dublin, Ireland has been chosen as a geographical location and VE-Pro software has been used to develop the virtual environment simulation for the building energy system.",

keywords = "Building Energy Management System, Custom Power Devices, Distributed Generation, Micro-generation, Power Quality, Smart Grid, Virtual Environment",

author = "Khadem, \{Shafiuzzaman K.\} and Malabika Basu and Ruth Kerrigan and Biswajit Basu",

year = "2014",

doi = "10.1109/ISIE.2014.6865043",

language = "English",

isbn = "9781479923991",

series = "IEEE International Symposium on Industrial Electronics",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "2676--2681",

booktitle = "Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014",

address = "United States",

note = "2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014 ; Conference date: 01-06-2014 Through 04-06-2014",

}

Khadem, SK, Basu, M, Kerrigan, R & Basu, B 2014, Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment. in Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014., 6865043, IEEE International Symposium on Industrial Electronics, Institute of Electrical and Electronics Engineers Inc., pp. 2676-2681, 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014, Istanbul, Turkey, 1/06/14. https://doi.org/10.1109/ISIE.2014.6865043

Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment. / Khadem, Shafiuzzaman K.; Basu, Malabika; Kerrigan, Ruth et al.
Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014. Institute of Electrical and Electronics Engineers Inc., 2014. p. 2676-2681 6865043 (IEEE International Symposium on Industrial Electronics).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment

AU - Khadem, Shafiuzzaman K.

AU - Basu, Malabika

AU - Kerrigan, Ruth

AU - Basu, Biswajit

PY - 2014

Y1 - 2014

N2 - In this paper, the placement of Custom Power Devices (CPDs) to improve the power quality of a distributed generation (DG) integrated building energy system (BES) has been analyzed. A typical residential building energy has been modeled in a Virtual Environment (VE) simulator. The extracted energy demand is generated by input load demand and hourly operating information. Based on the electrical energy demand for a typical day, a DG integrated BES (DG-BES) is then simulated in MATLAB to extract the current/voltage disturbance information into the network. Outcome of this simulation shows the voltage/current waveform along with the disturbances at different locations in the building. Finally a CPD is placed into the network and simulation in MATLAB shows the performance of the device by improving the power quality of the DG-BES. The city of Dublin, Ireland has been chosen as a geographical location and VE-Pro software has been used to develop the virtual environment simulation for the building energy system.

AB - In this paper, the placement of Custom Power Devices (CPDs) to improve the power quality of a distributed generation (DG) integrated building energy system (BES) has been analyzed. A typical residential building energy has been modeled in a Virtual Environment (VE) simulator. The extracted energy demand is generated by input load demand and hourly operating information. Based on the electrical energy demand for a typical day, a DG integrated BES (DG-BES) is then simulated in MATLAB to extract the current/voltage disturbance information into the network. Outcome of this simulation shows the voltage/current waveform along with the disturbances at different locations in the building. Finally a CPD is placed into the network and simulation in MATLAB shows the performance of the device by improving the power quality of the DG-BES. The city of Dublin, Ireland has been chosen as a geographical location and VE-Pro software has been used to develop the virtual environment simulation for the building energy system.

KW - Building Energy Management System

KW - Custom Power Devices

KW - Distributed Generation

KW - Micro-generation

KW - Power Quality

KW - Smart Grid

KW - Virtual Environment

UR - https://www.scopus.com/pages/publications/84907303236

U2 - 10.1109/ISIE.2014.6865043

DO - 10.1109/ISIE.2014.6865043

M3 - Conference contribution

AN - SCOPUS:84907303236

SN - 9781479923991

T3 - IEEE International Symposium on Industrial Electronics

SP - 2676

EP - 2681

BT - Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014

Y2 - 1 June 2014 through 4 June 2014

ER -

Khadem SK, Basu M, Kerrigan R, Basu B. Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment. In Proceedings - 2014 IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014. Institute of Electrical and Electronics Engineers Inc. 2014. p. 2676-2681. 6865043. (IEEE International Symposium on Industrial Electronics). doi: 10.1109/ISIE.2014.6865043

Placement of STATCOM to improve the power quality of a DG integrated building energy system in Virtual Environment

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Fingerprint

Cite this