Performance characteristics of a therapeutic ultrasound wire waveguide apparatus

Therapeutic ultrasound angioplasty has been investigated, clinically, by a number of researchers and represents a potentially promising therapy for the treatment of atherosclerotic lesions. To date, there has been no detailed analysis of the effect of mechanical design parameters, such as wire geometry or damping characteristics, on wire waveguide performance. An apparatus capable of delivering therapeutic ultrasound down small diameter nickel-titanium (NiTi) wire waveguides is described. The output peak-to-peak (p-p) displacements at the distal tip of a 1.0 mm diameter waveguide were measured experimentally, by means of an optical microscope and image analysis software. The output was measured for a range of waveguide lengths from 118 to 303 mm. Wire waveguide distal tip displacements as high as 98 μm (p-p) at 23.5 kHz were measured. For the range of lengths tested, the experimental measurements show the critical relationship between the length of the waveguide and the output distal tip displacements. A finite element model that can predict the resonant frequencies and distal tip displacements of various wire waveguide geometries and configurations, including the effect of damping, is presented. This numerical model has been validated against the experimental displacement data obtained. This will be a valuable design tool for ensuring the safety and effectiveness of therapeutic ultrasound angioplasty procedures.