Packaged, high-Q, microsphere-resonatorbased add-drop filter

Pengfei Wang; Ming Ding; Ganapathy Senthil Murugan; Lin Bo; Chunying Guan; Yuliya Semenova; Qiang Wu; Gerald Farrell; Gilberto Brambilla

doi:10.1364/OL.39.005208

Packaged, high-Q, microsphere-resonatorbased add-drop filter

Pengfei Wang, Ming Ding, Ganapathy Senthil Murugan, Lin Bo, Chunying Guan, Yuliya Semenova, Qiang Wu, Gerald Farrell, Gilberto Brambilla

School of Electrical and Electronic Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

In this Letter a packaged add-drop filter composed of a silica microsphere resonator and two fiber tapers is demonstrated theoretically and experimentally. A two-step fabrication process using an UV curable polymer is shown to stabilize the microsphere resonator with a diameter of 153 μm coupled to two tapered microfibers with diameters of 1.5 μm which are used as add and drop ports. A high loaded quality factor (Q-factor) of 0.9 × 10⁵ and a free spectral range (FSR) of about 104 pm are obtained at around 1550 nm from the microsphere for the parallel coupling tapered fibers in the add-drop configuration. This device has a range of advantages, such as ease of fabrication, low-cost, and compatibility with traditional and commercial fiber systems.

Original language	English
Pages (from-to)	5208-5211
Number of pages	4
Journal	Optics Letters
Volume	39
Issue number	17
DOIs	https://doi.org/10.1364/OL.39.005208
Publication status	Published - 2014

Access to Document

10.1364/OL.39.005208

Cite this

@article{fb4d11970e764321944bc1a71b632642,

title = "Packaged, high-Q, microsphere-resonatorbased add-drop filter",

abstract = "In this Letter a packaged add-drop filter composed of a silica microsphere resonator and two fiber tapers is demonstrated theoretically and experimentally. A two-step fabrication process using an UV curable polymer is shown to stabilize the microsphere resonator with a diameter of 153 μm coupled to two tapered microfibers with diameters of 1.5 μm which are used as add and drop ports. A high loaded quality factor (Q-factor) of 0.9 × 105 and a free spectral range (FSR) of about 104 pm are obtained at around 1550 nm from the microsphere for the parallel coupling tapered fibers in the add-drop configuration. This device has a range of advantages, such as ease of fabrication, low-cost, and compatibility with traditional and commercial fiber systems.",

author = "Pengfei Wang and Ming Ding and Murugan, \{Ganapathy Senthil\} and Lin Bo and Chunying Guan and Yuliya Semenova and Qiang Wu and Gerald Farrell and Gilberto Brambilla",

year = "2014",

doi = "10.1364/OL.39.005208",

language = "English",

volume = "39",

pages = "5208--5211",

journal = "Optics Letters",

issn = "0146-9592",

publisher = "Optica Publishing Group (formerly OSA)",

number = "17",

}

TY - JOUR

T1 - Packaged, high-Q, microsphere-resonatorbased add-drop filter

AU - Wang, Pengfei

AU - Ding, Ming

AU - Murugan, Ganapathy Senthil

AU - Bo, Lin

AU - Guan, Chunying

AU - Semenova, Yuliya

AU - Wu, Qiang

AU - Farrell, Gerald

AU - Brambilla, Gilberto

PY - 2014

Y1 - 2014

N2 - In this Letter a packaged add-drop filter composed of a silica microsphere resonator and two fiber tapers is demonstrated theoretically and experimentally. A two-step fabrication process using an UV curable polymer is shown to stabilize the microsphere resonator with a diameter of 153 μm coupled to two tapered microfibers with diameters of 1.5 μm which are used as add and drop ports. A high loaded quality factor (Q-factor) of 0.9 × 105 and a free spectral range (FSR) of about 104 pm are obtained at around 1550 nm from the microsphere for the parallel coupling tapered fibers in the add-drop configuration. This device has a range of advantages, such as ease of fabrication, low-cost, and compatibility with traditional and commercial fiber systems.

AB - In this Letter a packaged add-drop filter composed of a silica microsphere resonator and two fiber tapers is demonstrated theoretically and experimentally. A two-step fabrication process using an UV curable polymer is shown to stabilize the microsphere resonator with a diameter of 153 μm coupled to two tapered microfibers with diameters of 1.5 μm which are used as add and drop ports. A high loaded quality factor (Q-factor) of 0.9 × 105 and a free spectral range (FSR) of about 104 pm are obtained at around 1550 nm from the microsphere for the parallel coupling tapered fibers in the add-drop configuration. This device has a range of advantages, such as ease of fabrication, low-cost, and compatibility with traditional and commercial fiber systems.

UR - https://www.scopus.com/pages/publications/84906860266

U2 - 10.1364/OL.39.005208

DO - 10.1364/OL.39.005208

M3 - Article

AN - SCOPUS:84906860266

SN - 0146-9592

VL - 39

SP - 5208

EP - 5211

JO - Optics Letters

JF - Optics Letters

IS - 17

ER -

Packaged, high-Q, microsphere-resonatorbased add-drop filter

Abstract

Access to Document

Fingerprint

Cite this