Experimental investigation and statistical evaluation of optimized cutting process parameters and cutting conditions to minimize cutting forces and shape deviations in al6026-t9

M. Abas; B. Salah; Q.S. Khalid; I. Hussain; A.R. Babar; R. Nawaz; R. Khan; W. Saleem

doi:10.3390/ma13194327

Experimental investigation and statistical evaluation of optimized cutting process parameters and cutting conditions to minimize cutting forces and shape deviations in al6026-t9

M. Abas
, B. Salah
, Q.S. Khalid
, I. Hussain
, A.R. Babar
, R. Nawaz
, R. Khan
, W. Saleem

Research output: Contribution to journal › Article › peer-review

Original language	English
Article number	4327
Pages (from-to)	1-21
Number of pages	21
Journal	Materials
Volume	13
Issue number	19
DOIs	https://doi.org/10.3390/ma13194327
Publication status	Published - 2020

Keywords

Aluminum alloy
Analysis of variance (ANOVA)
Criteria importance through inter-criteria correlation (CRITIC)
Cutting forces
Minimum quantity lubricant (MQL)
Multi-objective optimization based on ratio analysis (MOORA)
Shape deviations
Taguchi orthogonal array design

Access to Document

10.3390/ma13194327

Cite this

@article{a18a5b999bbc4cce94bc5e09030d8faf,

title = "Experimental investigation and statistical evaluation of optimized cutting process parameters and cutting conditions to minimize cutting forces and shape deviations in al6026-t9",

keywords = "Aluminum alloy, Analysis of variance (ANOVA), Criteria importance through inter-criteria correlation (CRITIC), Cutting forces, Minimum quantity lubricant (MQL), Multi-objective optimization based on ratio analysis (MOORA), Shape deviations, Taguchi orthogonal array design",

author = "M. Abas and B. Salah and Q.S. Khalid and I. Hussain and A.R. Babar and R. Nawaz and R. Khan and W. Saleem",

note = "Publisher Copyright: {\textcopyright} 2020 by the authors. Licensee MDPI, Basel, Switzerland.",

year = "2020",

doi = "10.3390/ma13194327",

language = "English",

volume = "13",

pages = "1--21",

journal = "Materials",

issn = "1996-1944",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "19",

}

TY - JOUR

T1 - Experimental investigation and statistical evaluation of optimized cutting process parameters and cutting conditions to minimize cutting forces and shape deviations in al6026-t9

AU - Abas, M.

AU - Salah, B.

AU - Khalid, Q.S.

AU - Hussain, I.

AU - Babar, A.R.

AU - Nawaz, R.

AU - Khan, R.

AU - Saleem, W.

PY - 2020

Y1 - 2020

KW - Aluminum alloy

KW - Analysis of variance (ANOVA)

KW - Criteria importance through inter-criteria correlation (CRITIC)

KW - Cutting forces

KW - Minimum quantity lubricant (MQL)

KW - Multi-objective optimization based on ratio analysis (MOORA)

KW - Shape deviations

KW - Taguchi orthogonal array design

UR - https://www.scopus.com/pages/publications/85093914471

U2 - 10.3390/ma13194327

DO - 10.3390/ma13194327

M3 - Article

SN - 1996-1944

VL - 13

SP - 1

EP - 21

JO - Materials

JF - Materials

IS - 19

M1 - 4327

ER -