Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm

Tariq Limouni; Reda Yaagoubi; Khalid Bouziane; Khalid Guissi; El Houssain Baali

doi:10.1007/978-3-031-29860-8_66

Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm

Tariq Limouni
, Reda Yaagoubi
, Khalid Bouziane
, Khalid Guissi
, El Houssain Baali

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The deployment of renewable energy sources is a must to face global warming and decrease the emissions of CO2. PV systems are largely used as a source to supply loads through microgrids that prioritize the energy provided by renewable energy sources over other sources. To ensure the safety and safe operation of microgrids, it is mandatory to use an energy management system. In this paper, the modeling of a standalone DC microgrid with energy storage has been done in MATLAB/Simulink controlled by a PI controller to obtain an energy management system (EMS). The microgrid comprises a PV system as a supply source connected with a boost converter and a modified P&O MPPT algorithm to track the maximum power, a battery as a storage device with a bi-directional DC-DC converter, DC loads, and a control system. The objectives of the EMS are providing power to meet the load demand, balancing the DC bus voltage, and extending the battery life.

Original language	English
Title of host publication	Digital Technologies and Applications - Proceedings of ICDTA 2023
Editors	Saad Motahhir, Badre Bossoufi
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	650-659
Number of pages	10
ISBN (Print)	9783031298592
DOIs	https://doi.org/10.1007/978-3-031-29860-8_66
Publication status	Published - 2023
Externally published	Yes
Event	2nd International Conference on Digital Technologies and Applications, ICDTA 2023 - Fez, Morocco Duration: 27 Jan 2023 → 28 Jan 2023

Publication series

Name	Lecture Notes in Networks and Systems
Volume	669 LNNS
ISSN (Print)	2367-3370
ISSN (Electronic)	2367-3389

Conference

Conference	2nd International Conference on Digital Technologies and Applications, ICDTA 2023
Country/Territory	Morocco
City	Fez
Period	27/01/23 → 28/01/23

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Energy management system
Microgrid
PV system
Renewable energy
Voltage control

Access to Document

10.1007/978-3-031-29860-8_66Licence: Unspecified

Cite this

Limouni, T., Yaagoubi, R., Bouziane, K., Guissi, K., & Baali, E. H. (2023). Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm. In S. Motahhir, & B. Bossoufi (Eds.), Digital Technologies and Applications - Proceedings of ICDTA 2023 (pp. 650-659). (Lecture Notes in Networks and Systems; Vol. 669 LNNS). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-031-29860-8_66

Limouni, Tariq ; Yaagoubi, Reda ; Bouziane, Khalid et al. / Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm. Digital Technologies and Applications - Proceedings of ICDTA 2023. editor / Saad Motahhir ; Badre Bossoufi. Springer Science and Business Media Deutschland GmbH, 2023. pp. 650-659 (Lecture Notes in Networks and Systems).

@inproceedings{604688d4c5d84fcc8677c7dedb6735fe,

title = "Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P\&O MPPT Algorithm",

abstract = "The deployment of renewable energy sources is a must to face global warming and decrease the emissions of CO2. PV systems are largely used as a source to supply loads through microgrids that prioritize the energy provided by renewable energy sources over other sources. To ensure the safety and safe operation of microgrids, it is mandatory to use an energy management system. In this paper, the modeling of a standalone DC microgrid with energy storage has been done in MATLAB/Simulink controlled by a PI controller to obtain an energy management system (EMS). The microgrid comprises a PV system as a supply source connected with a boost converter and a modified P\&O MPPT algorithm to track the maximum power, a battery as a storage device with a bi-directional DC-DC converter, DC loads, and a control system. The objectives of the EMS are providing power to meet the load demand, balancing the DC bus voltage, and extending the battery life.",

keywords = "Energy management system, Microgrid, PV system, Renewable energy, Voltage control",

author = "Tariq Limouni and Reda Yaagoubi and Khalid Bouziane and Khalid Guissi and Baali, \{El Houssain\}",

note = "Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.; 2nd International Conference on Digital Technologies and Applications, ICDTA 2023 ; Conference date: 27-01-2023 Through 28-01-2023",

year = "2023",

doi = "10.1007/978-3-031-29860-8\_66",

language = "English",

isbn = "9783031298592",

series = "Lecture Notes in Networks and Systems",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "650--659",

editor = "Saad Motahhir and Badre Bossoufi",

booktitle = "Digital Technologies and Applications - Proceedings of ICDTA 2023",

address = "Germany",

}

Limouni, T, Yaagoubi, R, Bouziane, K, Guissi, K & Baali, EH 2023, Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm. in S Motahhir & B Bossoufi (eds), Digital Technologies and Applications - Proceedings of ICDTA 2023. Lecture Notes in Networks and Systems, vol. 669 LNNS, Springer Science and Business Media Deutschland GmbH, pp. 650-659, 2nd International Conference on Digital Technologies and Applications, ICDTA 2023, Fez, Morocco, 27/01/23. https://doi.org/10.1007/978-3-031-29860-8_66

Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm. / Limouni, Tariq; Yaagoubi, Reda; Bouziane, Khalid et al.
Digital Technologies and Applications - Proceedings of ICDTA 2023. ed. / Saad Motahhir; Badre Bossoufi. Springer Science and Business Media Deutschland GmbH, 2023. p. 650-659 (Lecture Notes in Networks and Systems; Vol. 669 LNNS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm

AU - Limouni, Tariq

AU - Yaagoubi, Reda

AU - Bouziane, Khalid

AU - Guissi, Khalid

AU - Baali, El Houssain

PY - 2023

Y1 - 2023

N2 - The deployment of renewable energy sources is a must to face global warming and decrease the emissions of CO2. PV systems are largely used as a source to supply loads through microgrids that prioritize the energy provided by renewable energy sources over other sources. To ensure the safety and safe operation of microgrids, it is mandatory to use an energy management system. In this paper, the modeling of a standalone DC microgrid with energy storage has been done in MATLAB/Simulink controlled by a PI controller to obtain an energy management system (EMS). The microgrid comprises a PV system as a supply source connected with a boost converter and a modified P&O MPPT algorithm to track the maximum power, a battery as a storage device with a bi-directional DC-DC converter, DC loads, and a control system. The objectives of the EMS are providing power to meet the load demand, balancing the DC bus voltage, and extending the battery life.

AB - The deployment of renewable energy sources is a must to face global warming and decrease the emissions of CO2. PV systems are largely used as a source to supply loads through microgrids that prioritize the energy provided by renewable energy sources over other sources. To ensure the safety and safe operation of microgrids, it is mandatory to use an energy management system. In this paper, the modeling of a standalone DC microgrid with energy storage has been done in MATLAB/Simulink controlled by a PI controller to obtain an energy management system (EMS). The microgrid comprises a PV system as a supply source connected with a boost converter and a modified P&O MPPT algorithm to track the maximum power, a battery as a storage device with a bi-directional DC-DC converter, DC loads, and a control system. The objectives of the EMS are providing power to meet the load demand, balancing the DC bus voltage, and extending the battery life.

KW - Energy management system

KW - Microgrid

KW - PV system

KW - Renewable energy

KW - Voltage control

UR - https://www.scopus.com/pages/publications/85161378878

U2 - 10.1007/978-3-031-29860-8_66

DO - 10.1007/978-3-031-29860-8_66

M3 - Conference contribution

AN - SCOPUS:85161378878

SN - 9783031298592

T3 - Lecture Notes in Networks and Systems

SP - 650

EP - 659

BT - Digital Technologies and Applications - Proceedings of ICDTA 2023

A2 - Motahhir, Saad

A2 - Bossoufi, Badre

PB - Springer Science and Business Media Deutschland GmbH

T2 - 2nd International Conference on Digital Technologies and Applications, ICDTA 2023

Y2 - 27 January 2023 through 28 January 2023

ER -

Limouni T, Yaagoubi R, Bouziane K, Guissi K, Baali EH. Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm. In Motahhir S, Bossoufi B, editors, Digital Technologies and Applications - Proceedings of ICDTA 2023. Springer Science and Business Media Deutschland GmbH. 2023. p. 650-659. (Lecture Notes in Networks and Systems). doi: 10.1007/978-3-031-29860-8_66

Energy Management and Voltage Control of Standalone DC Microgrid with Energy Storage and Modified P&O MPPT Algorithm

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Fingerprint

Cite this