Comparison of vibration measurements in composite materials using different types of polarimetric sensors

Manjusha Ramakrishnan, Ginu Rajan, Yuliya Semenova, Tomasz Woliński, Gerald Farrell

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

Low frequency vibration measurements in a composite material using embedded polarimetric sensor are presented in this paper. A glass fiber reinforced composite material sample is fabricated with two different polarimetric sensor types embedded in it. The two types of polarimetric sensors embedded are based on polarization maintaining photonic crystal fiber (PM-PCF) and Panda fiber. The vibration frequencies and amplitudes are measured using the embedded polarimetric sensors and the results from both sensor types are compared. Analysis of the limitations of Panda fiber based vibration measurements over PM-PCF is carried out and the results are presented. It is found that for high amplitude vibration measurements, PMPCF based sensors offer a wider linear range and are more suitable than Panda fiber based polarimetric fiber sensors. It is envisaged that the results from the studies will provide important information to end-users for selecting an appropriate sensor for vibration measurements in composite materials.

Original languageEnglish
Title of host publication22nd International Conference on Optical Fiber Sensors
DOIs
Publication statusPublished - 2012
Event22nd International Conference on Optical Fiber Sensors - Beijing, China
Duration: 15 Oct 201219 Oct 2012

Publication series

NameProceedings of SPIE - The International Society for Optical Engineering
Volume8421
ISSN (Print)0277-786X

Conference

Conference22nd International Conference on Optical Fiber Sensors
Country/TerritoryChina
CityBeijing
Period15/10/1219/10/12

Keywords

  • Panda fiber
  • Polarimetric sensor
  • Polarization maintaining photonic crystal fiber
  • Vibration-amplitude measurements

Fingerprint

Dive into the research topics of 'Comparison of vibration measurements in composite materials using different types of polarimetric sensors'. Together they form a unique fingerprint.

Cite this