Analysis of vibration measurements in a composite material using an embedded PM-PCF polarimetric sensor and an FBG sensor

Ginu Rajan; Manjusha Ramakrishnan; Yuliya Semenova; Andrzej Domanski; Anna Boczkowska; Tomasz Wolinski; Gerald Farrell

doi:10.1109/JSEN.2011.2172412

Analysis of vibration measurements in a composite material using an embedded PM-PCF polarimetric sensor and an FBG sensor

Ginu Rajan
, Manjusha Ramakrishnan
, Yuliya Semenova
, Andrzej Domanski
, Anna Boczkowska
, Tomasz Wolinski
, Gerald Farrell

Research output: Contribution to journal › Article › peer-review

Abstract

Low frequency vibration measurements in composite materials using embedded optical fiber sensors are presented in this paper. The two types of fiber sensors embedded are a polarization maintaining photonic crystal fiber (PM-PCF) polarimetric fiber sensor and a fiber Bragg grating (FBG) sensor. A glass fibre reinforced polymer composite material sample is fabricated with both fiber optic sensors embedded in it. A comparison between the performance of both the PM-PCF polarimetric fiber sensor and the FBG sensor embedded in the composite material is also presented.

Original language	English
Article number	6047557
Pages (from-to)	1365-1371
Number of pages	7
Journal	IEEE Sensors Journal
Volume	12
Issue number	5
DOIs	https://doi.org/10.1109/JSEN.2011.2172412
Publication status	Published - 2012

Keywords

Composite materials
fiber Bragg grating
polarimetric sensor
vibration measurement

Access to Document

10.1109/JSEN.2011.2172412

Cite this

@article{a66a01aa95c242c796a42da49545bef0,

title = "Analysis of vibration measurements in a composite material using an embedded PM-PCF polarimetric sensor and an FBG sensor",

abstract = "Low frequency vibration measurements in composite materials using embedded optical fiber sensors are presented in this paper. The two types of fiber sensors embedded are a polarization maintaining photonic crystal fiber (PM-PCF) polarimetric fiber sensor and a fiber Bragg grating (FBG) sensor. A glass fibre reinforced polymer composite material sample is fabricated with both fiber optic sensors embedded in it. A comparison between the performance of both the PM-PCF polarimetric fiber sensor and the FBG sensor embedded in the composite material is also presented.",

keywords = "Composite materials, fiber Bragg grating, polarimetric sensor, vibration measurement",

author = "Ginu Rajan and Manjusha Ramakrishnan and Yuliya Semenova and Andrzej Domanski and Anna Boczkowska and Tomasz Wolinski and Gerald Farrell",

year = "2012",

doi = "10.1109/JSEN.2011.2172412",

language = "English",

volume = "12",

pages = "1365--1371",

journal = "IEEE Sensors Journal",

issn = "1530-437X",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "5",

}

TY - JOUR

T1 - Analysis of vibration measurements in a composite material using an embedded PM-PCF polarimetric sensor and an FBG sensor

AU - Rajan, Ginu

AU - Ramakrishnan, Manjusha

AU - Semenova, Yuliya

AU - Domanski, Andrzej

AU - Boczkowska, Anna

AU - Wolinski, Tomasz

AU - Farrell, Gerald

PY - 2012

Y1 - 2012

N2 - Low frequency vibration measurements in composite materials using embedded optical fiber sensors are presented in this paper. The two types of fiber sensors embedded are a polarization maintaining photonic crystal fiber (PM-PCF) polarimetric fiber sensor and a fiber Bragg grating (FBG) sensor. A glass fibre reinforced polymer composite material sample is fabricated with both fiber optic sensors embedded in it. A comparison between the performance of both the PM-PCF polarimetric fiber sensor and the FBG sensor embedded in the composite material is also presented.

AB - Low frequency vibration measurements in composite materials using embedded optical fiber sensors are presented in this paper. The two types of fiber sensors embedded are a polarization maintaining photonic crystal fiber (PM-PCF) polarimetric fiber sensor and a fiber Bragg grating (FBG) sensor. A glass fibre reinforced polymer composite material sample is fabricated with both fiber optic sensors embedded in it. A comparison between the performance of both the PM-PCF polarimetric fiber sensor and the FBG sensor embedded in the composite material is also presented.

KW - Composite materials

KW - fiber Bragg grating

KW - polarimetric sensor

KW - vibration measurement

UR - https://www.scopus.com/pages/publications/84859904577

U2 - 10.1109/JSEN.2011.2172412

DO - 10.1109/JSEN.2011.2172412

M3 - Article

AN - SCOPUS:84859904577

SN - 1530-437X

VL - 12

SP - 1365

EP - 1371

JO - IEEE Sensors Journal

JF - IEEE Sensors Journal

IS - 5

M1 - 6047557

ER -

Analysis of vibration measurements in a composite material using an embedded PM-PCF polarimetric sensor and an FBG sensor

Abstract

Keywords

Access to Document

Fingerprint

Cite this