Skip to main navigation Skip to search Skip to main content

A Study of a Dielectric Resonator Antenna with 3D-Printed Conductive Parasitic Elements

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

A fully 3D-printed dielectric resonator antenna (DRA) with right-hand circular polarization, fed by a cross-shaped aperture is presented. The DRA utilizes parasitic conductive elements to improve the circular polarization. The antenna operates in the S-band (2-3GHz). The effects of the conductive element parameters on the axial ratio and gain are examined, as well as the effect of using a 3D-printed conductive material versus copper for fabrication. The two prototypes are then fabricated. The microstrip line, dielectric substrate, ground plane with the aperture slot, and the conductive walls are all 3D-printed in a single process using fused deposition modeling technology.

Original languageEnglish
Title of host publicationEuCAP 2025 - 19th European Conference on Antennas and Propagation
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9788831299107
DOIs
Publication statusPublished - 2025
Event19th European Conference on Antennas and Propagation, EuCAP 2025 - Stockholm, Sweden
Duration: 30 Mar 2025 → 4 Apr 2025

Publication series

NameEuCAP 2025 - 19th European Conference on Antennas and Propagation

Conference

Conference19th European Conference on Antennas and Propagation, EuCAP 2025
Country/TerritorySweden
CityStockholm
Period30/03/25 → 4/04/25

Keywords

  • 3D printing
  • circular polarization
  • Dielectric resonator antenna

Fingerprint

Dive into the research topics of 'A Study of a Dielectric Resonator Antenna with 3D-Printed Conductive Parasitic Elements'. Together they form a unique fingerprint.

Cite this